INSTALLATION
Mounting of indoor unit
z
Please refer to the installation manual provided with the indoor unit for mounting.
●
Please refer to the diagram below for installation height.
●
When installing this product to existing indoor units, please adjust the installation height of the
●
indoor units to height 230-235mm.
Pre6installation preparations
z
Please attach the duct flange provided with screws.
●
The Fresh Air Intake Kit can be used with an external air intake on just one side. Use included
●
sealed plate to apply for different eye holes.
Please apply Insulation
●
to the installed duct flange parts (Do not apply to sealed areas).
Indoor unit
Fresh air intake kit
Metal hanging fastener
(Unit : mm)
Ceiling
230 - 235
2
1
2
1
3
screw × 4 screw × 4
250 mm
20
0
+
Insulation
Insulation
Insulation
Insulation
Insulation
Cut the insulation
to
250
+20
0
mm and then apply.
[When taking in the air in two sides]
Please paste the insulation in the order shown in the figure below.
[Paste start position]
When pasting, make sure that there is no gap
between the INSULATION
(overlap is allowed)
Overlap with each other
- (06 - 208) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN
Summary of Contents for AIRSTAGE V-II
