Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 259 / 711

(Unit : mm)
Caution
Use ø5 tapping screws having a thread length of 10 to 20mm.
„
●
Do not remove any screws from where a circle is not marked.
„
●
Do not make a hole in the dowels where a circle is not marked. Otherwise, damage to the internal
„
●
parts will cause performance degradation or trouble.
SNOW HOOD INSTALLATION PROCEDURE
„ „
Installing the upper part of snow hood
„ z
The upper part of snow hood can be installed in the same manner as for the duct. For
„
●
details such as where to fix it, see the duct installation procedure.
Using the fixing positions on the top panel, install the components such as the frame,
„
●
column, front panel, top panel, and rear panel.
Installing the sides of snow hood
„ z
Before starting snow hood installation, remove the screws from the external net to remove
„
●
the net.
Install the snow hood, using the screw holes shown in the figure on the next page.
„
●
Remove the screws from where circles are marked in the figure, and make a ø4.6mm hole
„
●
in each dowel.
- (03 - 52) -
OU
TD
OO
R
UN
IT
S
OU
TD
OO
R
UN
IT
S