Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 484 / 711

666646 TRANSPORTATION THE OUTDOOR UNIT
HOISTING METHOD
„ „
When hanging the outdoor unit and conveying it to installation location, hang the unit with ●
rope by passing through the 4 opening holes on bottom of front and rear side as shown in
figure.
Use 2 ropes at least 8m long. If used shorter length, it may cause to damage the unit. ●
Use the sufficiently strong rope to bear the unit’s weight. ●
Place the protective board or filler cloth at the place where the cabinet may come into contact ●
with rope to prevent from damages. Without using them, cabinet may cause to damage or
deform.
During the hanging unit, make sure to keep the unit horizontally to prevent the drop.
●
Be careful not to shock the impacts during the hanging. ●
CONVEYING BY FORKLIFT
„ „
When using the forklift to convey the unit, pass the forklift arms through the opening space as ●
shown in below.
Front : Bottom of the wooden delivery pallet.
Side : Space between pallet and cabinet.
Enable to remove the pallet from cabinet. ●
Be careful not to be damaged. ●
CONVEYING BY FORKLIFT(Manual forklift: hand6fork)
„ „
When using the manual forklift to convey the unit, pass the forklift arms through the opening ●
space between pallet and cabinet from side.
Protective boards
Opening hole
Fork (forklift)
Front Side
Fork (forklift) or Fork
(Manual forklift)
Delivery pallet
Model name Weight (kg)
AJ*A72LALH 220
AJ*A90LALH 220
AJ*108LALH 275
AJ*126LALH 296
AJ*144LALH 296
- (06 - 12) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN