Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 600 / 711

FUNCTION DETAILS
„ „
Function Function
number Setting number Default
Details
Filter
indicator
interval
66
00
Default
Adjust the filter cleaning interval notifi cation. If the
notification is too early, change to setting 01. If the
notification is too late, change to setting 02.
06
Longer
02
Shorter
Filter
indicator
action
63
00
Enable
Enable or disable the fi lter
indicator. Setting 02 is for use
with a central remote control.
06
Disable
02
Display
only on
central
remote
control
Ceiling
airflow
20
00
Default
Regulate the airfl ow according to the needs of the
installation location. When set to 01, the air flow will be
stronger.
06
High
Ceiling
Vertical
airflow
direction
23
00
Default
Adjust the vertical airflow direction. All airflow direction
louvers are adjusted together.
(Cassette type only)
06
Raise
Horizontal
swing
airflow
direction
24
00
Default
Adjust the horizontal swing airflow direction.
(For horizontal swing equipped models)
06
Left half
02
Right half
Cool
air tem-
perature
trigger
30
00
Default
Adjust the cool air trigger temperature. To lower the trigger
temperature, use setting 01. To raise the trigger temperature,
use setting 02.
06
Adjust (1)
02
Adjust (2)
Heat
air tem-
perature
trigger
36
00
Default
Adjust the heat air trigger temperature. To lower the trigger
temperature by 6 degrees C, use setting 01. To lower the
trigger temperature by 4 degrees C, use setting 02. To raise
the trigger temperature, use setting 03.
06
Adjust (1)
02
Adjust (2)
03
Adjust (3)
Auto
restart
40
00
Enable
Enable or disable automatic system restart after a power
outage. 06
Disable
External
control
46
00
Start/Stop
Allow an external controller to start or stop the system, or to
perform an emergency stop.
* If an emergency stop is performed from an external
controller, same refrigerant system will be disabled.
06
Emergen-
cy stop
Error
report
target
47
00
All
Change the target for reporting errors. Errors can either be
reported in all locations, or only on the wired remote. 06
Display
only on
central
remote
control
- (06 - 128) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN