Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 576 / 711

Again, referring to the Settings List shown below, press the SELECT button (SW108), and 5)
display the code number of the function you want to set on the LED104.
Ex.) To select the Emergency Stop function
Next, press the ENTER button (SW109), and confirm the selection of the function you want
to set.
A flashing display on the LED104 changes to an illuminated display.
This completes FUNCTION SETTING.
To exit FUNCTION SETTING, press the ENTER button (SW109) in the setting completed 6)
status shown in step 5) above.
Then, press the MODE/EXIT button (SW107) to exit FUNCTION SETTING MODE.
To set another function, press the ENTER button (SW109) in the setting completed status 7)
shown in step 5) above.
Repeat steps 4) and 5) above to set other functions.
When all settings are complete, perform the operation described in step 6) above to exit.
LED105 LED104 LED105 LED104
LED105 LED104
LED105 LED104
LED105 LED104
LED105 LED104
LED105 LED104
LED105 LED104
*2 : 5 seconds after, even if ENTER button(SW109) is not pressed , LED105 changes to a flashing display
automatically.
LED105 LED104
LED105 LED104
*2
- (06 - 104) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN