Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 584 / 711

SW4 (SET4) setting
„ z
SW466, SW462, SW463, SW464 setting forbidden ●
SW5 (SET5) setting
„ z
SW566, SW562, SW563, SW564 setting forbidden ●
ROTARY SWITCH SETTING
„ „
SW6, SW7 setting
„ z
Indoor unit address switch ●
Sets the indoor unit addresses.
Please see "6-5-3 address setting" for indoor unit address conversion table.
SW8, SW9 setting
„ z
Refrigerant circuit address switch ●
Sets the refrigerant circuit address.
Please see "6-5-3 address setting" for refrigerant circuit address conversion table.
SW60 setting
„ z
Remote controller address switch ●
When the indoor unit is wired by remote controller group, to identity the indoor unit in the
remote controller group, the number (remote controller address) in the remote controller
group is set.
Set the remote controller address in the 0.1.2,~,15 order (Blank is not allowed)
(
u
...Factory setting)
SW4-1 SW4-2 SW4-3 SW4-4
u
OFF OFF OFF OFF Fixed at OFF
ON ON ON ON Setting forbidden
(
u
...Factory setting)
SW5-1 SW5-2 SW5-3 SW5-4
u
OFF OFF OFF OFF Fixed at OFF
ON ON ON ON Setting forbidden
INDOOR UNIT ADDRESS SWITCH (Factory setting SW 6: 0 SW 7: 0)
Rotary SW Description Remarks
SW6 Indoor unit address SW1 Indoor unit address (the first digit)
SW7 Indoor unit address SW2 Indoor unit address (the second digit)
REFRIGERANT CIRCUIT ADDRESS SWITCH (Factory setting SW 8: 0 SW 9: 0)
Rotary SW Description Remarks
SW8 Refrigerant circuit address SW1 Refrigerant circuit address (the first digit)
SW9 Refrigerant circuit address SW2 Refrigerant circuit address (the second digit)
REMOTE CONTROLLER ADDRESS SWITCH (Factory setting : 0)
Rotary SW Description Remarks
SW10 Remote controller address Remote controller address
- (06 - 112) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN