Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 551 / 711

SWITCHING SELECTION OF ADDRESS SETTING MODE
„ „
(3) Press and hold the “MANUAL/AUTO”
button for 3 seconds.
(4) Press and hold the “FAN” and the “ SET
TEMP.
p
” buttons. Whilst holding these
2 buttons, press the "RESET" button.
The position of the “MANUAL/AUTO” button varies depending on the model. ●
Refer to the operation manual for the position that is included with the unit.
The error will be displayed by continuosly pressing the "MANUAL/AUTO" for 10 sec or more. ●
In this case release the button or turn off the power.
An explanation of the displayed information as shown below.
●
SELECTION AND CONFIRMATION OF CUSTOM CODE
„ „
(5) Press the “ SET TEMP.
p
” or “ SET
TEMP.
q
” buttons to select the custom
code that matches the setting with the
indoor unit.By selecting the appropriate
custom code, the communication between
the indoor unit and the wireless RC
become possible.
(6) Press the “TIMER MODE" button to send
the code to the indoor unit.
SET TEMP. ( )
RESET
FAN
Function setting
mode display
Pi Pi Pi
MANUAL
AUTO
MANUAL AUTO
IR RECEIVER UNIT
CUSTOM CODE
( - - - )
The initial setting is " "
Pi Pi
Correct code:
Wrong code:
No Response
- (06 - 79) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN