Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 590 / 711

COMPLETION OF FUNCTION SETTING MODE
„ „
(13) Press and hold the “MANUAL/AUTO ”
button for 3 seconds.
Each LED light brightness is darkening though the content

of the display doesn't change.
(14) Press the “RESET” button.
After pressing the RESET
button, please set the custom
code again if b,c,d setting.
The function setting signal is not received after switched function setting completion mode. (Pi Pi Pi Pi Pi)
„ 
Press the "MANUAL/AUTO " button again for 3 sec to return to if required to return the function
„ 
setting mode.
RECONFIRMATION OF FUNCTION SETTING
„ „
(15) Press and hold the “FAN” and the “ SET
TEMP.
p
” buttons. Whilst holding these 2
buttons, press the "RESET" button.
(16) Function number to be confirmed is displayed.
Refer to (7).
Press the “TIMER set (-)” button.
Pi Pi Pi
MANUAL
AUTO
MANUAL AUTO
IR RECEIVER UNIT
RESET
SET TEMP. ( )
RESET
FAN
Function setting
mode display
"TIMER set (-)"
(Example) Function number : 30, Setting number : 06
OPERATION LAMP
(GREEN)
TIMER LAMP
(ORANGE)
FILTER LAMP
(RED)
0.5sec ON / 0.5sec OFF
OFF
1 time
3 times
1 - 10 sec
1 - 10 sec
0.5sec ON / 0.5sec OFF
- (06 - 118) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN