Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 519 / 711

663656 EV KIT
EV KIT SELECTION
„ „
Model name Application indoor units
UTR-EV09XB AS

E07LACH, AS

E09LACH
UTR-EV14XB AS

E12LACH, AS

E14LACH
A wrong selection could cause improper operation, because the built-in electronic expansion
valve is different.
MODELS REQUIRE EV KIT :
„ „
AS

E07LACH, AS

E09LACH, AS

E62LACH, AS

E64LACH
Select the above indoor unit for use in small and, quiet rooms such as hotel or bedroom, ●
where noise would be a distraction.
The other indoor units, do not require an EV kit. ●
DECIDING INSTALLATION LOCATION
„ „
Keep the installed piping and wiring length less than 5m. ●
EV kit should be considered to install away from the living quarters, such as above the ceiling. ●
Install the EV kit where it can be accessed for servicing. ●
An EV kit must be required for the compact wall mounted type (EEV
external model) on the liquid pipe side6
CAUTION
Do not install EV kit in a location with any of the following conditions.
Do not install the kit outdoor. ●
Do not install the kit where the danger of combustible gas leakage. ●
Do not install the kit where near a fire place or other heating appartatus. ●
Do not install the kit where oily smoke, machine oil (i.e. factory),salty enviloment with ●
direct sea breeze.
Do not install the kit where too much of dust. ●
Do not install the kit where corrosive gas such as sulphurous acid gas is generated. ●
Do not install the kit where exposed to rains and direct sunlight. ●
EV Kit
Service hole
Indoor unit
5m : Max. (wiring length)
Ceiling
- (06 - 47) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN