Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 606 / 711

666686 TOUCH PANEL CONTROLLER
ADDRESS SETTING
„ „
Display the Installer Setting screen and press "Change" button of "1. The controller
„
●
Address Number Setting".
If it changes to "1. The controller Address Number Setting" screen, press "01" button of
„
●
Address No., and then press "OK" button.
If it returns to Installer Setting screen, make sure that Address No. is "01", and then end.
„
●
Address No6 can be set between "00" and "65"6 (Up to maximum 66 Touch Panel ●
Controller can be installed to 6 system)6
When installing two or more Touch Panel Controller, set up so that Address No6 does ●
not overlap6
Please refer to the OPERATING MANUAL of Touch Panel Controller for details6 ●
Please keep Address No6 of Touch Panel Controller from overlapping the controller ●
(Network convertor for Group remote controller) connected to the same VRF Network
system
Ex) When setting the Address Number to "01".
01
- (06 - 134) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN