Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 256 / 711

(Unit : mm)
33303 LOCALLY PROCURED PARTS
3330333 AIR DISCHARGE DUCT
PRECAUTION
„ „
All the components/parts such as the duct, frame, and screws are to be locally procured.
„
●
Do not install the duct where seasonal wind blow directly against to the discharge port.
„
●
Install so that the static pressure of the air flow path
„
●
, including the duct is 80Pa or less.
Note that installation of the duct increases the height of the cabinet.
„
●
If installation space may narrow, like as consecutive unit layout, be sure to fix the duct to the
„
●
unit before placing the unit.
When the duct is installed, the noise may become louder.
„
●
DUCT LAYOUT EXAMPLE
„ „
Model
Dimension C
(Minimum) (Maximum)
AJ

A72LALH
862 928 AJ

A90LALH
AJ

108LALH
AJ

126LALH
1172 1238
AJ

144LALH
Caution
Make the height A of the duct opening section 500mm or greater. ●
Make the height B of the duct, excluding the flange 500mm or greater. ●
Make the width (dimension C) of the duct within the range of the table shown above. ●
Provide a Chamfer or round the corner at the air flow path. ●
Design the duct weight with 100kg or less as the standard. ●
Design the duct so that maintenance of the motor is possible. ●
When the length of the duct is long, provide support material at suitable intervals. ●
500 500
114
1576
Chamfer or a round the corner
- (03 - 49) -
OU
TD
OO
R
UN
IT
S
OU
TD
OO
R
UN
IT
S