Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 575 / 711

FUNCTION SETTING
„ „
After verifying that the system is normally, press the MODE/EXIT button (SW107) once. 1)
Press the SELECT button (SW108), and display “F2” on the LED104. 2 )
*1:The “F1”and “F9” modes are used for maintenance, so do not set them in regular
operation.
When “F2” appears on the LED104, press the ENTER button (SW109). 3)
A flashing display appears on the LED105, and the flashing display of “F2” on the LED104
changes to the illuminated display of a number.
Referring to the Settings List shown below, press the SELECT button (SW108) and display 4)
the code number of the mode you want to set on the LED105.
Ex.) To select switching between Forced Stop and Emergency Stop
Next, press the ENTER button (SW109), and confirm the selection of the mode you want to
set.
A flashing display on the LED105 changes to an illuminated display, and an illuminated
display on the LED104 changes to a flashing display.
LED105 LED104 LED105 LED104
LED105 LED104 LED105 LED104
LED105 LED104
LED105 LED104
LED105 LED104 LED105 LED104
LED105 LED104 LED105 LED104 LED105 LED104 LED105 LED104
*1 *1
(Monitoring mode) (Setting mode) (Function mode) (Error history mode)
(The display of the LED104 changes each time when the SELECT button is pressed.)
- (06 - 103) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN