Fujitsu AIRSTAGE V-II, Design & Technical Data

Page: 560 / 711

Refrigerant circuit address setting
„ z
Pressing the SET BACK button, select a remote controller address (select the indoor 9)
unit you want to operate).
Pressing the SET TIME < button or the SET TIME > button, display function number 10)
02.
Pressing the SET TEMP. V button or the SET TEMP. 11) Λ button, set up the refrigerant
circuit address data. (The setting range is from 00 to 99.)
Pressing the TIMER SET button, confirm the selected refrigerant circuit address data. 1 2 )
(The data will be transferred to the indoor unit.)
Remote controller address
Ex.) When remote controller address “01” is
selected
*If the indoor unit you want to operate has already been selected, skip step 9).
Function number
< : Down button
> : Up button
Refrigerant circuit address data
Ex.) When refrigerant circuit address data “18” is
set up
GOOD NO GOOD
When refrigerant circuit address data was
normally set up on the indoor unit
(Flashing display changes to illuminated display.)
When refrigerant circuit address data was not ●
set up on the indoor unit (-- is displayed.)
Set up refrigerant circuit address data again ●
according to the procedure in step 11) above.
- (06 - 88) -
SY
ST
EM
DE
SIGN
SY
ST
EM
DE
SIGN