Dell C5765DN, User Manual

Page: 340 / 673

15 Tools
340
Security Settings
Set the security settings.
SSL/TLS Settings
Configure the SSL/TLS settings.
Device Certificate - Server
Select a certificate for HTTP SSL/TLS communications.
HTTP - SSL/TLS Communication
Select whether or not to enable HTTP SSL/TLS communications.
HTTP - SSL/TLS Port Number
Set the port number used for HTTP SSL/TLS communication from 1 to 65535.
The default value is 443.
Note •
Do not use the numbers assigned to the other ports.
LDAP - SSL/TLS Communication
Set whether or not to enable the SSL/TLS communications for authentication and searches.
If you enable the LDAP SSL/TLS communications, you must set [Primary Server Port
Number] and [Secondary Server Port Number] under [LDAP Server/Directory Service
Settings].
The port number for SSL/TLS communications of the LDAP directory server is normally set
to 636.
SMTP-SSL/TLS Communication
Configure the SSL/TLS communications.
• Disabled
The machine does not communicate in SSL/TLS.
• STARTTLS (If Available)
The machine verifies the certificate and communicates in SSL/TLS. If the verification
fails, the machine does not communicate in SSL/TLS.
• STARTTLS
The machine verifies the certificate and communicates in SSL/TLS. If the verification
fails, the machine cannot perform communication.
• SSL/TLS
The machine communicates in SSL/TLS.
ThinPrint-SSL/TLS Communication
Select whether or not to enable the SSL/TLS communications.
Device Certificate - Client
Select a certificate for HTTP SSL/TLS communications.
Verify Remote Server Certificate
When the machine is operated as an SSL client, select whether or not to verify the certificate
of the remote server.