manualshive.com logo in svg

Dell C5765DN, User Manual

Share
Download
Dell C5765DN User Manual Download Page 307

Common Service Settings

307

Job Flow Error Report

Select whether or not to automatically print a Job Flow Error Report.

Maintenance

You can initialize or delete data from the hard disk of the machine.

Initialize Hard Disk

Initializes the hard disk.
Data deleted by initialization includes supplementary fonts and ESC/P forms.

Note

•

The secure print documents and logs are not erased.

Delete All Data

This feature is designed to prevent the leakage of confidential information of a customer 

when the machine is returned to Dell. By executing [Start], all data registered on the 

machine is deleted.
Do not use this feature normally.

Software Options

This feature is for service representative use. For more information, contact Customer 

Support at 

dell.com/contactdell

.

Power on Self Test

Set whether or not to perform self test when the machine is turned on and started up.
If any abnormal condition such as intentional program modification is found during the 

program diagnosis, the machine stops starting up and records the information in the audit 

log.

Note

•

The information may not be recorded in the audit log depending on the status of program malfunction.

•

If the machine does not start, contact Customer Support at dell.com/contactdell.

Adjust Color Registration

Allows you to calibrate the colors automatically or manually.

Auto Color Registration

Pressing [Start] executes the color calibration.
For more information, refer to "Auto Color Registration" (P.251).

Side Color Registration

After executing the automatic color calibration, you can manually adjust the horizontal 

colors for yellow, magenta, and cyan by entering values.
You can enter from -5 to +5, and press [Adjust] after entering the values.
Pressing [Sample Printout] prints the sample that the values changed are reflected.

Note

•

Use Tray 5 and plain A4 

 size paper for this feature.

For more information, refer to "Side Color Registration" (P.253).

Adjust Paper Registration

Allows you to adjust the print image position vertically and horizontally. You can enter from 

- 2.0 to + 2.0, and press [Adjust] after entering the values.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands