Dell C5765DN User Manual Download Page 520

Page: 520 / 673

22 Problem Solving

520

Text is blurred.

The paper is unsuitable.

Replace the paper with new one.
Refer to "Loading Paper" (P.207).

Paper has been added to the

paper loaded.
The paper is damp.

White or color

patches appear

vertically.

Paper feed

direction

The drum cartridge has

deteriorated or is damaged.

Replace the drum cartridge with a new one.
Refer to "Replacing Drum Cartridges C, M,

Y, or K" (P.223).

No toner remains in the toner

cartridge.

Replace the toner cartridge with a new one.
Refer to "Replacing Toner Cartridges"

(P.219).

The machine interior (laser

scanners) may be soiled.

Clean the interior.
Refer to "Cleaning the Interior (Laser

Scanners)" (P.240).

Text or images are

printed at an

angle.

The paper guides in the paper

tray are not set in the correct

positions.

Adjust the horizontal and vertical paper

guides to the correct positions.
Refer to "Loading Paper" (P.207).

Symptom

Cause

Remedy

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Brands by name

Popular brands