Dell C5765DN User Manual Download Page 220

Page: 220 / 673

13 Maintenance

220

Open the front cover.

Pull out the toner cartridge you want to replace.

Note

•

Always pull out the cartridge slowly so that

you do not spill any toner.

•

Do not touch the parts shown in the

illustration. Toner can dirty and stain your

hands.

•

Be careful not to spill toner when handling the

toner cartridge.

Unpack a new toner cartridge of the desired color.

Shake the toner cartridge 5 to 6 times to
distribute the toner evenly.

Note

•

Do not touch the area shown in the illustration

when you shake the cartridge.

•

Be careful not to spill toner when handling the

toner cartridge.

Hold the cartridge with the arrow facing up,
and push the cartridge in slowly until it stops.

Close the front cover.

Note

•

If the front cover is not closed completely, a

message appears and the machine will remain

paused.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands