background image

14 Machine Status

258

Overview of Machine Status

You can check machine status and the number of printed pages on the screen. You can also 

print various reports/lists to check the job history, settings and registered information.

1

Press the <Machine Status> button.

You can check the following information on the [Machine Status] screen:

Machine Information

You can check the machine configuration, paper tray status, and hard disk overwriting status. 

You can also change or set print modes, and check the number of pages printed per meter or 

per user. You can also print various reports/lists to check the job history, settings and 

registered information.

For more information, refer to "Machine Information" (P.259).

Faults

You can check the information on errors that occurred on the machine.

For more information, refer to "Faults" (P.273).

Supplies

You can check the status of consumables.

For more information, refer to "Supplies" (P.274).

Billing Information

You can check the number of pages printed by meter.

For more information, refer to "Billing Information" (P.275).

<Machine Status> button

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews: