Dell C5765DN User Manual Download Page 263

Page: 263 / 673

Machine Information

263

PostScript Logical Printers List

Prints the list of logical printers created in PostScript.

Note

•

You can configure the setting for PostScript logical printers using Dell Printer Configuration Web Tool.

ESC/P Settings List

Prints the settings configured in the ESC/P-K emulation mode.

ESC/P Logical Printers List

Prints the programming settings configured in the ESC/P-K emulation mode.

HP-GL/2 Settings List

Prints the settings for the HP-GL

, HP-GL/2

and HP-RTL emulation modes.

HP-GL/2 Logical Printers List

Prints the stored programming settings for the HP-GL, HP-GL/2, and HP-RTL emulation

modes.

HP-GL/2 Palette List

Prints the sample list in 256 colors that can be set with the pen attribute on HP-GL and HP-

GL/2 emulation modes.

Font List

Prints the list of fonts available on the machine.

Note

•

Information printed varies depending on the options installed.

PCL Font List

Prints the fonts available in PCL.

PostScript Font List

Prints the fonts available in PostScript.

Scan Reports

Select [Scan Reports].

Note

•

To display the [Scan Reports] screen, press the <Machine Status> button, and then select [Machine

Information] > [Print Reports] > [Scan Reports].

Select a list to print.

Press the <Start> button.

Reports

You can print the Configuration Report, Scan/Fax Configuration Report, and Domain Filter

List. Select a list to print, and then press the <Start> button.
• Configuration Report

You can check the hardware configuration, network information, and print and copy

settings of the machine.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands