Dell C5765DN User Manual Download

Page: 241 / 673

Cleaning the Machine

241

Remove the cleaning rod from the backside of
the front cover.

Insert the cleaning rod fully into one of the four
holes until it clicks into the interior of the

machine as shown in the illustration, and then

pull it out.

Return the cleaning rod to its original location.

Close the front cover.

Note

•

If the front cover is not closed completely, a

message appears and the machine will remain

paused.

Cleaning the Conductivity Temperature Depth (CTD) Sensor

Note

•

To prevent electric shock, always turn off the machine and disconnect the power cable from the

grounded outlet before performing maintenance.

•

Ensure nothing touches or scratches the surface (black-colored film) of the transfer belt unit.

Scratches, dirt, or oil from your hands on the film of the transfer belt unit may reduce print quality.

•

To protect the drum cartridges from overexposure to bright light, close the inner cover within five

minutes. If the front cover remains open for more than five minutes, print quality may degrade.

Make sure that the <Data> indicator light is off and there are no jobs currently in process.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands