Dell C5765DN User Manual Download

Page: 228 / 673

13 Maintenance

228

Push the staple cartridge into the finisher until
it clicks into place.

Close the finisher front cover.

Note

•

If the front cover is not closed completely, a message appears and the machine will remain paused.

Replacing Fusing Unit

When the fusing unit is near or reaches the end of its life, the following messages are

displayed on the touch screen. Follow the messages.

Note

•

To prevent electric shock, always turn off the machine and disconnect the power cable from the

grounded outlet before performing maintenance.

•

To avoid burns, do not replace the fusing unit immediately after printing. The fusing unit becomes

extremely hot during use.

Make sure that the <Data> indicator light is off and there are no jobs currently in process.

Press the power switch to the [

] position to

switch the power off and wait for 30 minutes

before removing the fusing unit.

Message

Remaining Page Yield

Solution

Consumables need to

be ordered. Press

Machine Status button

and select the Supplies

tab for details.

Approx. 20,000 pages

Order the fusing unit.

Consumables need to

be replaced. Press

Machine Status button

and select the Supplies

tab for details.

Replace the fusing unit

with a new one.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands