Dell C5765DN User Manual Download

Page: 43 / 673

About the [Home] Screen

About the [Home] Screen

This section describes the [Home] screen, which can be displayed by pressing the <Home>

button.

Message Field

Displays a message.

Login Information Field

Select this field in the upper right corner of the touch screen to display the User ID entry

screen for entering the System Administration mode, the Authentication mode, or the

Accounting mode.
When a user is authenticated, the login information is displayed in this field.

Note

•

You can also press the <Log In/Out> button on the control panel to enter the Authentication mode.

•

To exit the Authentication mode, press the <Log In/Out> button on the control panel. You can also

select the login information field in the upper right corner of the touch screen.

For information on the Authentication or Accounting mode, refer to "Authentication and Accounting

Features" (P.477).

Service Buttons

Allows you to set the features for each service.

Copy

You can set the features for the Copy service.

For more information, refer to "Copy" (P.49).

Fax

You can set the features for the Fax service.

For more information, refer to "Fax" (P.123).

E-mail

You can scan documents and send the scanned data as an e-mail attachment.

Message field

Service buttons

Additional feature buttons

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands