manualshive.com logo in svg

Dell C5765DN, User Manual

Share
Download
Dell C5765DN User Manual Download Page 119

Job Assembly

119

When all documents have been scanned, select [Last Original].

Note

•

After the first original set is copied, the machine automatically outputs the data remained if the 

machine is left unused for the period specified in [Auto Clear]. For more information on [Auto Clear], 

refer to "Auto Clear" (P.296).

1

Select [Combine Original Sets]. 

2

Select [On]. 

Off

Disables this feature.

On

Enables this feature.

Original Orientation

Allows you to specify the orientation of the document so that the machine can identify the 

top of the document.

Note

•

If the [Original Orientation] setting differs from the actual document orientation, the machine may not 

detect the top of the document correctly.

• Upright Images

Select this option when placing the top edge of the document against the top side of the 

document glass or document feeder.

• Sideways Images

Select this option when placing the top edge of the document against the left side of the 

document glass or document feeder. 

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands