Dell C5765DN User Manual Download

Page: 513 / 673

Machine Trouble

513

Unable to copy

with the specified

size.

Is the document glass or the

document cover dirty?

Clean the document glass and the document

cover.
Refer to "Cleaning Document Cover and

Document Glass" (P.246).

Is the document a transparent

type such as a transparency

film?

Place the document on the document glass,

and place a white sheet on top of the

document when copying.

Is the document in the correct

position?

Load the document correctly.
Refer to "Copying Procedure" (P.50).

Is the document loaded

correctly?
Are the document guides on

the document feeder set in

the correct positions?

Adjust the document guide positions.
Refer to "Copying Procedure" (P.50).

Is the document folded?

Unfold and correctly load the document.
Refer to "Copying Procedure" (P.50).

Is the document a non-

standard size?

Specify the document size.
Refer to "Copying Procedure" (P.50).

Symptom

Cause

Remedy

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands