Dell C5765DN User Manual Download

Page: 545 / 673

Network-related Problems

545

Dell Printer Configuration Web Tool Problems

The possible symptoms and remedies for problems when using Dell Printer Configuration

Web Tool are as follows:

Symptom

Remedy

Cannot connect to Dell Printer

Configuration Web Tool.

Is the machine working properly?

Check whether the machine is turned on.
Is Internet Services (HTTP) port activated?

Print Configuration Report to confirm.
Is the Internet address correctly entered?

Confirm the Internet address again. If the problem persists,

enter an IP address to connect to Dell Printer Configuration

Web Tool.
Is a proxy server being used?

Depending on the proxy server, connections may not be possible.

The [Please wait] message is

continuously displayed.

Wait for a while as instructed.

If the status does not change, click the [Refresh] button.

If this does not impart any effect, confirm whether the machine

is operating correctly.

The [Refresh] button is not

functioning.

Are you using a specified browser?
Refer to "Installation of Dell Printer Configuration Web Tool"

(P.418) to confirm whether your browser is supported.

Selecting the menu on the left

frame does not update the right

frame contents.
The screen display is distorted. Change the window size for the browser.
The latest information is not

displayed.

Click the [Refresh] button.

Characters are not correctly

displayed.

Use Western European language command.

Pressing [Apply] does not apply

the new settings.

Are the entered values correct?

If a value outside of the permitted range is entered, the update

will automatically be made within the range.
This may occur when the control panel is being operated or the

operation has just been completed.

When the automatic reset function is set, any setting configure

with Dell Printer Configuration Web Tool is not applied until

setting the time set for automatic reset. Wait until then.

When you click [Apply], a

message such as "The server has

returned ineffective or

unrecognizable response" or

"No data" is displayed on the

browser.

Is the password correct?

The entries for Password and Confirm Password do not match.

Enter the correct password.
Restart the machine.

Cannot delete jobs.

Wait for a while, and click [Refresh].

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands