background image

Common Service Settings

309

Note

An optional component is required to use this feature. For more information, contact Customer 

Support at dell.com/contactdell.

Auto Job Promotion

You can select whether or not to allow another job to automatically bypass the current job 

when the machine is unable to start an operation for any reason, (for example, running out 

of paper in a tray when starting copying or printing).

Note

Stored documents such as Secure Print and Sample Set documents cannot be used with the Auto Job 

Promotion feature.

When [Enabled] is selected and there is a job bypassed because of paper out, a message stating the 

reason of the job promotion appears. The job bypassed can be processed after you take proper 

measures by following the instruction of the message. Or, you can cancel the job by pressing the 

<Clear All> button. When multiple jobs are bypassed, a screen that lists the bypassed jobs appears. 

This screen allows you to display the details screen and to delete the jobs.

Default Print Paper Size

You can set the most commonly-used paper size, A4 or 8.5 x 11", to print reports and/or lists.

Odd Page 2 Sided

You can specify whether or not to add a blank page when a document containing an odd 

number of pages is printed in 2-sided.

Paper Size Settings

You can specify the size of paper to be automatically detected when you use standard sizes 

of a document or the machine is set to detect sizes of a document.
You can select from the following tables: [A/B Series (8 x 13")], [A/B Series], [A/B Series (8K/

16K)], [A/B Series (8 x 13"/8 x 14")], and [Inch Series].

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews: