Dell C5765DN User Manual Download

Page: 230 / 673

13 Maintenance

230

Replacing Transfer Belt Unit

When the transfer belt unit is near or reaches the end of its life, the following messages are

displayed on the touch screen. Follow the messages.

Note

•

To prevent electric shock, always turn off the machine and disconnect the power cable from the

grounded outlet before performing maintenance.

•

Ensure nothing touches or scratches the surface (black-colored film) of the transfer belt unit.

Scratches, dirt, or oil from your hands on the film of the transfer belt unit may reduce print quality.

•

To protect the drum cartridges from overexposure to bright light, close the inner cover within five

minutes. If the front cover remains open for more than five minutes, print quality may degrade.

Make sure that the <Data> indicator light is off and there are no jobs currently in process.

Press the power switch to the [

] position to

switch the power off and wait for 30 minutes

before removing the transfer belt unit.

Raise the latch of the right hand cover and open
the cover.

Message

Remaining Page Yield

Solution

Consumables need to

be ordered. Press

Machine Status button

and select the Supplies

tab for details.

Approx. 30,000 pages

Order the Transfer Belt

Kit.

Consumables need to

be replaced. Press

Machine Status button

and select the Supplies

tab for details.

Replace the Transfer

Belt Kit with a new one.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands