Dell C5765DN User Manual Download Page 403

Page: 403 / 673

Accounting

403

ColorTrack

Accounting is carried out based on the user information and account information pre-

registered on the machine.

Accounting Mode

Allows you to set whether or not to enable the Accounting feature for the following services:

Note

•

The services displayed on the screen vary depending on the machine configuration.

•

When [Enable Accounting] is selected for a service, [ ] is displayed on the button of the applicable

service on the [Home] screen. Also, [ : Requires Login] is displayed at the lower left of the [Home]

screen. [ ] and [ : Requires Login] are not displayed after authentication.

•

Print jobs may be canceled depending on the settings in "Receive Control" (P.413).

Verify User Details

Allows you to set whether or not to verify user information.

Selecting [Yes] also allows you to select [For printer/Direct Fax Jobs].

Customize User Prompts

Allows you to set the type of user information used for authentication.

Note

•

Account ID is used for accounting.

• Display User ID & Account ID Prompts

Prompts users to enter both their user ID and Account ID.

• Display User ID Prompt Only

Prompts users to enter their user ID only.

• Display Account ID Prompt Only

Prompts users to enter their Account ID only.

• Display No Prompts

Does not prompt users to enter their user ID or Account ID.

Accounting Login Screen Settings

You can configure Accounting settings.

Alternative Name for User ID

If required, you can change the indication "User ID" on the [Login] screen that appears when

the <Log In/Out> button on the control panel or the login information area on the touch

screen is pressed to another name such as "User Name" or "Number". The alias can be set to

1 to 15 single-byte characters.

Note

•

The name changed is also printed in a report or a list.

Mask User ID (***)

You can set how an entered user ID is shown on the screen. Use this feature to enhance

security as required.

• Copy

• Fax

• Store to Folder

• E-mail

• Scan to PC

• Store to USB

• Store & Send Link

• Media Print - Text

• Media Print - Photos

• Print

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Brands by name

Popular brands