manualshive.com logo in svg

Dell C5765DN, User Manual

Share
Download
Dell C5765DN User Manual Download Page 52

3 Copy

52

2

Load the document face down, and align it 
against the top left corner of the document 

glass. 

3

Close the document cover.

Note

•

When a standard size document is loaded on the document glass, the size of the document is 

displayed in the message field.

Step 2 Selecting Features

The following two services are available to copy documents.

Simple Copy

Allows you to only select basic features to copy documents.

Copy

Allows you to make detailed settings to copy documents.

The following describes how to select features on the [Copy] screen.

For information on Simple Copy, refer to "Simple Copy" (P.59).

Note

•

The features displayed on the screen depend on the configuration of your machine.

•

When the Authentication or Accounting feature is enabled, a user ID and passcode may be required. 

Ask your system administrator for the user ID and passcode.

1

Press the <Home> button.

2

Select [Copy]. 

<Home> button

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands