Dell C5765DN User Manual Download

Page: 620 / 673

22 Problem Solving

620

Use the handle to lift the duplex module.

Remove any remaining pieces of paper.

Close the right hand cover.

Note

•

When closing the right hand cover, apply your

hand in the vicinity of the handle as shown in

the illustration, and then press the cover firmly

toward the printer.

Paper Jams in Fusing Unit

The following describes how to clear paper jams occurring in the fusing unit.

Note

•

To prevent electric shock, always turn off the printer and disconnect the power cable from the

grounded outlet before performing maintenance.

•

To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes extremely

hot during use.

Rise the latch on the handle of the right hand
cover to open the cover.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands