Dell C5765DN User Manual Download

Page: 283 / 673

System Settings Procedure

283

Step 5 Setting a Feature

Select any feature.

Note

•

Select a submenu from the [Group] list, and then select a feature from the [Features] list.

•

Select [ ] or [ ] as required.

Select an item to set.

After setting the feature, select [Save].

Select [Close] repeatedly until the [Home] screen is displayed.

Note

•

If rebooting the machine is required to enable the new settings, when you select [Close] in the [Tools]

screen, a message may be displayed. Follow the message and reboot the machine. After the machine

reboots, it exits from the System Administration mode, and the <Log In/Out> button is unlit.

Step 6 Exiting System Administration Mode

Press the <Log In/Out> button.

Note

•

You can also log out by pressing the login information field on the touch screen, and then selecting

[Logout].

•

The <Log In/Out> button is unlit when the machine exits from the System Administration mode.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands