manualshive.com logo in svg

Dell C5765DN, User Manual

Share
Download
Dell C5765DN User Manual Download Page 30

2 Product Overview

30

Machine Components

The following describes machine components and their functions.

Front View

Note

•

The following combinations of trays are available:

- Standard tray
- Standard tray + 550-sheet feeder x 1
- Standard tray + 550-sheet feeder x 1 + 1100-sheet feeder x 1
- Standard tray + 1100-sheet feeder x 1

1

2

3

4

5

6

7
8

9

10

No.

Component

Function

1

Center output tray

Copies and prints are delivered here, facing down.

2

Right hand cover

Open this cover to replace the consumables or clear paper jams.

3

Waste toner container

Collects waste toner.

4

Inner cover

Open this cover to replace the consumables.

5

550-sheet feeder (optional)

Load paper here.

Note

•

 The machine allows for a maximum of 4 trays (Standard tray, 550-sheet 

feeder, and 1100-sheet feeder (2 trays)).

6

1100-sheet feeder (optional)

Load paper here.

Note

•

The machine allows for a maximum of 4 trays (Standard tray, 550-sheet 

feeder, and 1100-sheet feeder (2 trays)).

7

Front cover

Open this cover to replace the consumables.

8

Standard tray

Load paper here.

9

Toner cartridges

Contains Black (K), Cyan (C), Magenta (M), and Yellow (Y) toner (image 

forming powder).

10

Drum cartridges

Contains Black (K), Cyan (C), Magenta (M), and Yellow (Y) drums.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands