Dell C5765DN, User Manual

Page: 421 / 673

Configuring Machine Settings Using Dell Printer Configuration Web Tool
421
Configuring Machine Settings Using Dell Printer Configuration Web Tool
Dell Printer Configuration Web Tool enables you to change various settings on the machine
from a computer.
Note •
Confirm that the port in use is enabled in [Properties] tab > [Connectivity] > [Port Settings] of Dell
Printer Configuration Web Tool when an item that you want to set is not displayed.
• If you change a setting from Dell Printer Configuration Web Tool while the control panel is being used,
the change does not take effect until you manually reboot the machine. If [Auto Clear] is set to [On],
the changed items are displayed on the control panel after the machine reboots. For information about
Auto Clear, refer to "Auto Clear" (P.296).
• You may be prompted to enter your user name and passcode when you attempt to change settings on
Dell Printer Configuration Web Tool. In that case, enter the system administrator's user ID and
passcode into the [User Name] and [Password] fields. The default user ID is "admin" and passcode is
"1111".
You can configure the following settings with Dell Printer Configuration Web Tool:
Item How to Select Overview/Reference
Usage Counters Select from [Status] tab
> [Counters]
Displays the total number of pages printed
for each service.
Total Runtime Select from [Status] tab Displays the cumulative time of runtime
(printing or scanning), standby time, Sleep
mode time, warm-up time, and power-off
time of the machine by minutes.
Folder Select from [Scan] tab Refer to "Create Folder" (P.381).
Job Flow Sheets Refer to "Create Job Flow Sheet" (P.383).
Add New Name Select from [Address
Book] tab
Refer to "Add Address Book Entry" (P.390).
Job Management Select from [Properties]
tab > [General Setup]
Allows you to configure the delete method
of jobs.
Paper Tray Attributes Refer to "Changing the Paper Settings"
(P.214).
Paper Settings Refer to "Changing the Paper Settings"
(P.214).
Energy Saver Settings Allows you to configure the settings for the
Power Saver feature.
Stored Job Settings Refer to "Stored File Settings" (P.374).
Memory Settings Refer to "Allocate Memory" (P.345).
Web Browser Setup Refer to "Web Browser Setup" (P.379).