Dell C5765DN User Manual Download

Page: 192 / 673

10 Job Status

192

Public Folder

This feature allows you to store data in the machine and send the data by operating on a

remote machine.
The following describes how to print or delete a job stored in a public folder.

Note

•

An optional component is required to use this feature. For more information, contact Customer

Support at dell.com/contactdell.

Select [Public Folder].

Select the job to be printed or deleted.

Note

•

Select [Refresh] to display the updated

information.

•

Select [ ] to return to the previous screen or

[ ] to move to the next screen.

Select any option.

Select All

Selects all jobs. To deselect all the jobs, select this button again.

Delete

Deletes the selected job stored in the public folder.

Refer to "When [Delete] is Selected" (P.192).

Print

Prints the selected job stored in the public folder.

Refer to "When [Print] is Selected" (P.193).

When [Delete] is Selected

Select [Delete].

Delete

Deletes the job.

Note

•

Once the job is deleted, it cannot be restored.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands