Dell C5765DN User Manual Download

Page: 178 / 673

10 Job Status

178

Job Status Overview

The Job Status feature allows you to check current, pending, and completed jobs. You can

also cancel printing and print jobs that are waiting to be output or resumed.

Press the <Job Status> button.

You can operate the following on the [Job Status] screen.

Checking current/pending jobs

Lists current and pending jobs, and displays their details. Also allows you to cancel current

or pending jobs.

For more information, refer to "Checking Current/Pending Jobs" (P.179).

Checking completed jobs

Displays the status of completed jobs, and their details.

For more information, refer to "Checking Completed Jobs" (P.181).

Checking stored jobs

Prints or deletes jobs stored using the Charge Print, Secure Print, Private Charge Print,

Sample Set, and Delayed Print features.

For more information, refer to "Printing and Deleting Stored Jobs" (P.182).

Printing pending jobs

Prints jobs that are waiting to be output or resumed.

For more information, refer to "Printing Pending Jobs" (P.195).

<Job Status> button

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands