Dell C5765DN User Manual Download

Page: 40 / 673

2 Product Overview

Control Panel

The following describes the names and functions of components on the control panel.

3 4

5 6

No.

Component

Function

<Home> button

Press this button to display the [Home] screen.

Touch screen

Displays messages required for operation, and buttons for various features.

You can directly touch the touch screen to instruct operations and set

features.

<Log In/Out> button

Lights up when a user is authenticated in the System Administration mode,

the Authentication mode, or the Accounting mode. Displays the User ID

entry screen for entering the System Administration mode, the

Authentication mode, or the Accounting mode. Press this button to exit

these modes.

<Job Status> button

Press this button to check or cancel the current job, to check or print stored

jobs, or to check completed jobs.

<Machine Status> button

Press this button to check the machine status and meters, to check the status

of consumables, and to print reports.

<Power Saver> button

When the machine is not used for a while, it enters the Power Saver mode to

reduce power consumption. When the Power Saver mode is active, the

<Power Saver> button lights up.

Press this button to enter or exit the Power Saver mode.

<Interrupt> button

Press this button to suspend a copy or print job in progress to have the

machine process another job. During the Interrupt mode, the <Interrupt>

button lights up. Pressing the <Interrupt> button again exits the Interrupt

mode and resumes the suspended job.

<Clear All> button

Returns the settings you made to the default values. The machine returns to

the same state as when it is powered on.

<Stop> button

Press this button to pause the current job or communications.

<Start> button

Press this button to start scanning a document.

<Main Power> indicator

Lights up when the main power is switched on.

Note

•

If the main power is not switched on, the machine will not be powered on

even when the power is switched on.

<Error> indicator

Blinks if a system error occurs.

This indicator lights up when a problem other than a system error occurs

with the machine, including paper jams and running out of paper or toner.
If the <Error> indicator blinks, contact Customer Support at

dell.com/contactdell

If the <Error> indicator lights up, refer to "Machine Trouble" (P.511).

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands