Dell C5765DN User Manual Download

Page: 222 / 673

13 Maintenance

222

Pull out the waste toner container slowly while
holding its left side with one hand.

Note

•

Be careful not to drop the waste toner

container while you are removing it.

•

Do not touch the shutter part as shown in the

illustration. Toner can dirty and stain your

hands.

•

Be careful not to spill toner when handling the

waste toner container.

While holding the left side of the waste toner
container, push the container in until it clicks.

Close the front cover.

Note

•

If the front cover is not closed completely, a

message appears and the machine will remain

paused.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands

Dell C5765DN, User Manual

Search results

Summary of Contents for C5765DN

Reviews:

Related manuals for C5765DN

Brands by name

Popular brands