Dell C5765DN User Manual Download | Manualshive

Page: 644 / 673

background image

23 Install Operation for Eco copy/My Forms

644

The definitive version of this document should be available at
ftp://ftp.cdrom.com/pub/infozip/license.html indefinitely.

Copyright (c) 1990-1999 Info-ZIP. All rights reserved.

For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of

individuals:

Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly,

Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath,

Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor

Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,

Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, Antoine Verheijen, Paul

von Behren, Rich Wales, Mike White

This software is provided "as is," without warranty of any kind, express or implied. In no event

shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or

consequential damages arising out of the use of or inability to use this software.

Permission is granted to anyone to use this software for any purpose, including commercial

applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. Redistributions of source code must retain the above copyright notice, definition,

disclaimer, and this list of conditions.

2. Redistributions in binary form must reproduce the above copyright notice, definition,

disclaimer, and this list of conditions in documentation and/or other materials provided with

the distribution.

3. Altered versions--including, but not limited to, ports to new operating systems, existing

ports with new graphical interfaces, and dynamic, shared, or static library versions--must be

plainly marked as such and must not be misrepresented as being the original source. Such

altered versions also must not be misrepresented as being Info-ZIP releases--including, but

not limited to, labeling of the altered versions with the names "Info-ZIP" (or any variation

thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or

"MacZip" without the explicit permission of Info-ZIP. Such altered versions are further

prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or of the

Info-ZIP URL(s).

4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "WiZ," "Pocket

UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.

-------------------------------------------------------------------------------------------------------------zlib
THIS FILE is almost entirely based upon code by Jean-loup Gailly and Mark Adler. It has

been modified by Lucian Wischik.
The modifications were: incorporate the bugfixes of 1.1.4, allow unzipping to/from handles/

pipes/files/memory, encryption, unicode, a windowsish api, and putting everything into a

single .cpp file.
The original code may be found at http://www.gzip.org/zlib/
The original copyright text follows.

«
...
642
643
644
645
646
...
»

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for C5765DN

Brand: IEI Technology Pages: 40

Brand: Teac Pages: 36

Brand: ZENEC Pages: 1

Brand: Pyle Pages: 39

Brand: Nav TV Pages: 8

Interflex IF-73

Brand: Allegion Pages: 9

MultiReader PER3664BC

Brand: Prestigio Pages: 108

PowerScan PD8590-DPM

Brand: Datalogic Pages: 128

Brand: SATO Pages: 20

InkPad X PB1040

Brand: Pocketbook Pages: 104

Brand: Rosewill Pages: 1

Brand: Advantech Pages: 24

Brand: Magtek Pages: 2

Brand: SoundMax Pages: 38

Brand: BASETech Pages: 48

Brand: PowerBass Pages: 12

Brand: Planet Audio Pages: 25

Brand: KWorld Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands