manualshive.com logo in svg

Dell C5765DN, User Manual

Share
Download
Dell C5765DN User Manual Download Page 104

3 Copy

104

2

Select any option.

Off

Disables this feature.

2 Pages

Copies two document pages onto one side of a single sheet of paper.

4 Pages

Copies four document pages onto one side of a single sheet of paper.

8 Pages

Copies eight document pages onto one side of a single sheet of paper.

Reading Order

Allows you to select how to lay out images on a page.

Original Orientation

Allows you to specify the orientation of the document so that the machine can identify the 

top of the document.

Note

•

If the [Original Orientation] setting differs from the actual document orientation, the machine may not 

detect the top of the document correctly.

• Upright  Images

Select this option when placing the top edge of the document against the top side of the 

document glass or document feeder.

• Sideways Images

Select this option when placing the top edge of the document against the left side of the 

document glass or document feeder.

Poster (Making Enlarged Copies Spread over Multiple Sheets)

An enlarged copy of a document can be made spread over multiple sheets.
This feature allows you to create a large poster by pasting together the copies spread over 

multiple sheets. Copied sheets are provided with a paste margin so that they can be pasted 

together. The paste margin is fixed to 10 mm.

Note

•

Ensure that the actual orientation of the original document matches the [Original Orientation] setting 

on the [Layout Adjustment] screen.

•

You cannot use the document feeder with this feature.

Summary of Contents for C5765DN


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands