Datalogic Gryphon GD4100, User Manual

Page: 1 / 10

Sheet # 694u – Bar code (option)
Version 1.04a User guide ATEQ 6th series Page 1/10
BAR CODE (OPTION)
1. DEFINITION
The “ Bar code ” option enables to install a bar code reader on a second specific RS232
connector of the ATEQ instruments.
It enables on reading of the code to select a test program and eventually to launch the test of
control (if the option is validated).
The quantity of characters read by the reader should not exceed 22 . Beyond the unit will not
take into account the character string (bar code string).
1.1. C
OMMUNICATION PARAMETERS CONFIGURATION
1.1.1. Bar code reader configuration
The Bar Code reader must be set with the following communication parameters:

9600 bauds,

7 bits,

1 stop,

Parity even .
The communication parameters of the ATEQ devices are the same by default and fixed, it's not
provide to change it.