Matrix-2000™
Quick Reference Guide
Figure A
Reading Window
Positioning LED
Calibration LED
Communication LED
Keypad button
1
2
4
5
3
6
9
8
7
Main/Auxiliary Interface
Auxiliary Interface
Good Read LED
Ethernet Interface (for 21XX
models only)
10 External Trigger LED
Power On LED
11
NOTE
For further details on product installation, see the complete Installation Manual available on
the CD included with this product.
Compliance:
-
This product is intended to be installed by Qualified Personnel only.
- This product is intended to be connected to a UL Listed
Computer which supplies power directly to the reader or a
UL Listed Direct Plug-in Power Unit marked LPS or
“Class 2”, rated 10 to 30 V, minimum 1 A.
- In order to meet the EMC requirements:
•
connect reader chassis to the plant earth ground by
means of a flat copper braid shorter than 100 mm;
•
connect the main interface cable shield to pin 1 of the
reader 25-pin connector;
•
use two clip-on ferrite sleeves (type Stewart 28A2029-
0A0) on the main interface cable near the reader 25-
pin connector;
•
connect the Ethernet interface cable shield to the
reader chassis (for Matrix-21XX only)
TO EN 60825-1:2001
Model Description:
MATRIX - 2XXX-X
Optics
1 = Ultra High Density (UHD)
2 = High Density (HD)
3 = Standard Density (SD)
4 = Low Density (LD)
5 = Medium Range (MR)
6 = Long Range (LR)
Image Sensor
1 = VGA CCD
5 = SXGA CMOS
Device Connectivity
0 = RS232/RS485 + RS232
1 = RS232/RS485 + RS232+ Ethernet
Other Options
R = 90° Reading Window
6
7
8
2
3
4
5
9
10
11
1
