Covidien Nellcor GR101704, Service Manual

Page: 93 / 236

Service Mode
Service Manual 6-31
a.
Press SAVE CHANGES to retain the change.
b.
Press CANCEL to leave the default as it was.
Restore Factory Defaults
Proceed only if institutional defaults require replacement with the standard
factory defaults.
To restore institutional defaults back to factory defaults
1.
Access the service function menu. Reference To access service function menus , p. 6-18.
2.
Select SETTINGS.
3.
Select RESTORE FACTORY DEFAULTS.
4.
Select the desired option.
a.
Press YES to restore the factory defaults.
b.
Press CANCEL to retain the factory defaults.
5.
Select the desired option.
a.
Press BACK to return to the previous submenu.
b.
Press EXIT MENU.
6.5.2
Service Menu
Reference Monitoring Screen Calibration , p. 10-44, for monitoring screen cal-
ibration instructions. Reference Software and Firmware Upgrades , p. 10-45,
for software or firmware upgrade instructions.
6.5.3
Logs Menu
Error, event, and software update logs remain in flash until the monitoring
system overwrites them and will survive both power cycles and software
upgrades. If a user chooses to “clear” a log, the monitoring system renames
the current log files, rather than deleting them. Possible scenarios for either file
corruption or a partial loss of data in a log would include backdating the mon-
itoring system when it has already recorded data to an existing date or a power
interrupt during retrieval of a log.