Covidien Nellcor GR101704, Service Manual

Page: 142 / 236

Modification and Testing
10-20 Service Manual

Note:
If the alarm duration set to OFF, the display immediately shows AUDIO OFF.
5.
Adjust the alarm volume setting to an appropriate audio level for the environment
in which it is to operate.
6.
Press SAVE CHANGES.
To configure pulse beep volume
Adjust the pulse tone volume after adjusting the alarm volume. Reference To
configure alarm volume , p. 10-19.
1.
Turn on the monitoring system by pressing the POWER ON key.
2.
Press MENU.
3.
Press SOUND SETTINGS.
4.
Select PULSE BEEP VOLUME.The monitoring system displays an volume icon with
increment and decrement buttons.
5.
Press decrement (-) until the pulse beep volume setting displays 25%. Verify the
volume of the alarm decreases.
6.
Press increment (+) to increase the pulse beep volume setting to a maximum value
of 100%. Verify the volume increases.
7.
Adjust the pulse beep volume setting to an appropriate audio level for the envi-
ronment in which it is to operate.
8.
Press SAVE CHANGES.
To configure button click volume
Adjust the pulse tone volume after adjusting the alarm volume. Reference To
configure alarm volume , p. 10-19.
1.
Turn on the monitoring system by pressing the POWER ON key.
2.
Press MENU.
3.
Press SOUND SETTINGS.
4.
Select BUTTON CLICK VOLUME.The monitoring system displays an volume icon
with increment and decrement buttons.