Covidien Nellcor GR101704, Service Manual

Page: 110 / 236

Trend Data Access
7-14 Service Manual
6.
Disable the Dynamic Host Configuration Protocol by pressing the button next to
“Obtain an IP address automatically.”
7.
Attach a USB keyboard.
8.
Input the IP address and subnet mask.
9.
Scroll to the bottom of the screen and press OK.
10.
Close the window by pressing the “X” in the top, right corner.
11.
Detach the USB keyboard.
12.
Press FINISH.
7.3.4
Data Port Communications
To setup data port communication
1.
While in normal monitoring mode, press MENU.
2.
Press CONNECTIVITY SETTINGS.
3.
Select the desired protocol for data exchange.
4.
Press SAVE CHANGES to save the selected setting.
7.4
Using the Nurse Call Interface
7.4.1
Nurse Call Feature

WARNING:
Do not use the nurse call feature as the primary source of alarm notification.
The audible and visual alarms of the monitoring system, used in conjunction
with clinical signs and symptoms, are the primary sources for notifying
medical personnel that an alarm condition exists.

WARNING:
The nurse call feature of the monitoring system is operational when the
monitoring system is powered by AC power or battery power. However, the
nurse call feature does not function when monitoring system alarms are
silenced.