Covidien Nellcor GR101704, Service Manual

Page: 207 / 236

Chassis Disassembly and Reassembly
Service Manual 12-19
9.
Ensure both halves remain on a static-free work surface.
10.
Review the following table for identifying Main PCB connectors. The table identi-
fies cables and connectors beginning on the top, right hand corner of the
Main PCB and proceeding clockwise. Some cables are barely visible or require
special routing.
11.
Disconnect the spade connector (GND) from the J21 mating blade on the Main
PCB.
12.
Disconnect the five-pin battery connector from the J23 receptacle on the Main PCB.
13.
Disconnect the four-pin power connector from the J22 receptacle on the Main PCB.
14.
Disconnect the three-pin fan connector from the J2 receptacle on the Main PCB.
Table 12-3. Main PCB Connections
Receptacle Cable Description Cable Color
J5 Two-pin speaker cable Red and black
J7 Five-connector flex cable Translucent aqua
J15 Main ribbon cable Gold
J2 Three-pin fan cable Red, black, and yellow
J22 Four-pin power cable Red and black
J23 Five-pin battery cable Black
J21 Spade Green GND
J10 Six-connector flex cable Gold
J6 Four-connector flex cable Gold