![background image](http://html.mh-extra.com/html/comdial/dxp-plus-series/dxp-plus-series_manual_2639682518.webp)
5.6.1 Matching Serial Data Port Numbers To Installation Locations
Description:
You must take this programming action to match the data port number of serial data ports
11–18 with the installation location that you choose for the DXOPT–COM cards.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select systems and press ENTER.
3. From system menu, select system parameters and press ENTER.
4. From system parameters menu, type item number for feature and press ENTER.
5. Press SPACE bar for communications card board location
and press ENTER to accept setting.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
5.6.2 Setting Serial Data Port Parameters
Description:
You can change the baud rates, data bits, stop bits, parity, and flow control for each serial data
port in the system to match the data device that you connect there.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select serial ports and press ENTER.
4. From serial ports menu, type item number for main port or for auxiliary port
and press ENTER.
5. From serial port type menu, select the serial port number and press ENTER.
6. Press SPACE bar for feature setting
7. Press TAB for next parameter.
8. Repeat steps 6 and 7 for all parameters.
9. Press ENTER to accept settings.
10. When finished, press ESCAPE twice.
11. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
12. Press ESCAPE to end.
Accredited by the Dutch Council
for Certification for certification
and registration activities.
Comdial’s Quality Management System Is
Certified To The ISO 9001 Standard.
Charlottesville, Virginia 22901-2829
R
World Wide Web: http://www.comdial.com/
IMI89–195
Installing And Programming The PC Attendant Position