DXP Plus Programming Instructions
Cost Incoming
Description:
If you have arranged for the system to cost calls, you can arrange for it to also cost incoming
calls on a per line basis. You can arrange for the costing to begin as soon as the call arrives in
the system , begin after the user answers the call or begin after a programrned delay.
Plus, you
can pick the call rate table that you want the system to use when it costs the call.
Programming:
1. Press CONTROL T for main menu.
2 . From the main menu, select lines and press ENTER.
3 . From the lines menu, select line programming.
4 . Type line port number (l-240) or name and press ENTER.
5 . From the line programming menu, type item number for feature and press ENTER.
6 . From cost incoming prompt, press SPACE bar for desired feature setting
and press RETURN.
7 . From incoming cost delay prompt, press SPACE bar for desired feature setting
and press ENTER.
8 . From incoming cost route prompt, type l-32 for desired route table.
9 . When finished, press ESCAPE twice.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4-8 for each line port or press ESCAPE to end.
Automatic Route Selection Programming
