DXP Plus Programming Instructions
74.2.4
Programming For Tracker Access
Description:
Assign tracker access to a particular station intercom or group of intercoms using the following
class of service (COS) programming. (The default is yes for COS 1 and COS32.)
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select Stations and press
3. From stations menu, select COS Programming and press ENTER.
4. From COS programming, type class of service number (l-32) and press ENTER.
5. From COS (class number) programming, select Tracker Access.
6. Toggle the SPACE bar to select yes/no and press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
8.
Press ESCAPE to end.
NOTE: To activate this feature, assign this COS to the desired intercom numbers. See
Programming Station Features
in
Section 7.2.
Page Recall
Description:
This timing feature determines the amount of time that a Tracker page remains in a Tracker
page orbit before recalling to the paging station.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select timing and press ENTER
4. From system timing menu, type item number for feature and press ENTER.
5. Press SPACE bar for feature setting and press ENTER to accept setting.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
Peripheral Devices Programming 14-7
