Plus Programming
8.1
Line Programming
Line Name
Description:
You can assign a name to a line. A name shows in the display of an LCD speakerphone as a
identification aid. A valid name is composed of any seven alpha-numeric characters but the
first character must be an alphabetic character.
Programming:
To assign a name to a line,
1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number l-240 number or previously assigned name and press ENTER.
5. From line programming menu, type item number for feature and press ENTER.
6. Type name (a-z, A-Z, O-9) and press ENTER. A name can be up to seven characters long.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each line port or press ESCAPE to end.
8.1.2
Line Type
Description:
Condition the line port as to the type of line or function that the port serves.
Programming:
1 Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number l-240 or previously assigned name and press ENTER.
5. From the line programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting and press ENTER to accept setting.
7. When finished, press ESCAPE twice.
8 . Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each line port or press ESCAPE to end.
Ground Start Line
Refer to
Section
8.5 for a discussion about ground start lines.
Loop Start Line
Refer to
Section
8.6 for a discussion about loop start lines.
E&M Tie Line
Refer to
Section
for a discussion about
tie lines.
DID Line
Refer to
Section
8.8 for a discussion about DID lines.
Auxiliary Port
If you type-name a line port as an auxiliary port, you condition the line port to interface with external paging
equipment instead of a telephone line.
6-2 Line Features Programming
