6.8.15
Authorization Code Timeout
Description:
Use the
Section
procedure to enable the authorization code feature. Once a user uses the
authorization code to access his or her telephone features, those features remain in effect until
any idle time at the telephone exceeds the authorization code time-out period that you program
with this feature.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select timing and press ENTER.
4. From system timing menu, type item number for feature and press ENTER.
5. Press SPACE bar for feature setting and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
Ring Timeout
Description:
Use this procedure to set the number of times that the system sends a ring signal to an
industry-standard telephone on a system-wide basis. Although the ringing stops at the
industry-standard telephone when the time-out occurs, the system continues to present the call
at the telephone for answering until the caller abandons it. See
Section
7.2.35 for other IST
programming requirements.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select timing and press ENTER.
4. From system timing menu, type item number for feature and press ENTER.
5. Press SPACE bar for time and press ENTER to accept setting.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
6.8.17
DTMF Receiver Timeout
Description:
You can program the amount of time that the system waits to receive a DTMF tone from an
industry-standard telephone, after the user has lifted the telephone’s handset and before he or
she has pressed a dial pad digit. The system stops sending dial tone to the station and stops
waiting for DTMF dialing digits after this time-out occurs.
If this happens, the user must hang
up the handset and lift it again to re-establish the dial tone. See
Section
7.2.35 for other IST
programming requirements.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select timing and press ENTER.
4. From system timing menu, type item number for feature and press ENTER.
5. Press SPACE bar for time and press ENTER to accept setting.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
Sys tern Features Programming
21
